About  •  Libelium UK  •  IoT Test Vehicle  •  Careers  •  News    Support: +44 1624 639437  •  Sales: +44 1624 777837

Libelium Plug & Sense

Libelium Plug & Sense is a powerful IoT device platform that supports applications in Smart Agriculture, Water, Environment, Cities and Industry. Each device supports a wide range of sensors (150+ supported) and can communicate back to cloud platforms and back office systems with relative ease.

Plug & Sense allows you to deploy wireless sensor networks in an easy and scalable manner with limited maintenance costs and complexity. This not only accelerates time to market but reduces the learning curve considerably – allowing you to focus on the application, rather than the underlying hardware components.

The units feature a robust waterproof enclosure with specific external sockets to connect the sensors, the solar panel and antenna. The devices can be programmed using USB or OTA (Over the Air).

MTG is a Libelium UK Distributor so can offer pre-sales advice and also design, supply, implement and support IoT solutions.

Libelium - Plug and Sense

Verticals

Key Features

  • Ultra lower power consumption
  • Battery / Solar / Mains Power
  • Compliant with the latest radio and cloud technologies
  • Fully certified (CE, FCC, IC, ANATEL, RCM)
  • 170+ sensor types
  • Flexible and powerful development IDE

Plug & Sense Applications

  • Air Pollution Monitoring
  • Water Pollution Monitoring
  • Dynamic Car Parking
  • Livestock, agricultural and crop systems
  • Weather stations
  • Water level monitoring

Plug & Sense configurations

Smart Environment PRO

Smart Environment PRO enables the Air Quality Index (AQI) calculation, thanks to 16 gas sensors providing extremely accurate ppm values and a high-end Particle Matter sensor.

Libelium - Plug & Sense

Sensors:

  • Carbon Monoxide (CO) [Calibrated] (low and high concentrations)
  • Carbon Dioxide (CO2) [Calibrated]
  • Molecular Oxygen (O2) [Calibrated]
  • Ozone (O3) [Calibrated]
  • Nitric Oxide (NO) [Calibrated] (low concentrations)
  • Nitric Dioxide (NO2) [Calibrated]
  • Sulfur Dioxide (SO2) [Calibrated] (high accuracy)
  • Ammonia (NH3) [Calibrated] (low and high concentrations)
  • Methane (CH4) [Calibrated] – and other combustible gases
  • Molecular Hydrogen (H2) [Calibrated]
  • Hydrogen Sulfide (H2S) [Calibrated]
  • Hydrogen Chloride (HCl) [Calibrated]
  • Hydrogen Cyanide (HCN) [Calibrated]
  • Phosphine (PH3) [Calibrated]
  • Ethylene Oxide (ETO) [Calibrated]
  • Chlorine (Cl2) [Calibrated]
  • Particle Matter (PM1 / PM2.5 / PM10) – Dust Sensor
  • Temperature
  • Humidity
  • Atmospheric pressure
  • Luminosity (Luxes Accuracy) for Smart Lighting
  • Ultrasound (distance measurement)

Smart Agriculture

Smart Agriculture is designed to perform vineyards monitoring for enhancing wine quality, selective irrigation on golf courses and conditions control in greenhouses among others.

Sensors:

  • Soil moisture (3 depths)
  • Soil temperature
  • Leaf wetness
  • Solar radiation (PAR and UV)
  • Atmospheric pressure
  • Stem, truck and fruit diameter
  • Anemometer
  • Wind vane
  • Pluviometer
  • Air temperature
  • Air humidity
  • Luminosity (Luxes Accuracy) for Smart Lighting
  • Ultrasound (distance measurement)

Smart Water

Smart Water allows monitoring of water quality in rivers, lakes and the sea.

Libelium Smart Water

Sensors:

  • pH
  • Oxidation-Reduction Potential (ORP)
  • Dissolved Oxygen (DO)
  • Conductivity
  • Temperature
  • Turbidity
  • Calibration Kits for the sensor probes available
  • Ammonium (NH4+), Bromide (Br), Calcium (Ca2+), Chloride (Cl), Cupric (Cu2+)
  • Fluoride (F), Iodide (I), Lithium (Li+), Magnesium (Mg2+)
  • Nitrate (NO3), Nitrite (NO2), Perchlorate (CIO4)
  • Potassium (K+), Silver (Ag+), Sodium (Na+)
  • Chlorophyll
  • BGA
  • Organic matter CDOM/FDOM
  • Ammonium
  • Nitrate
  • Chloride
  • Sodium
  • Calcium
  • Inductive conductivity, salinity andtemperature
  • Turbidity and temperature NTU
  • Suspended solids, turbidity, sludge blanket and temperature MES5

Smart Cities Pro

Smart Cities Pro allows monitoring of noise, air quality, waste management and lighting

Libelium Plug and Sense
  • Noise / Sound Level Sensor (dBA / LeqA) + Calibration Tests
  • Particle Matter (PM1 / PM2.5 / PM10) – Dust Sensor
  • Carbon Monoxide (CO) [Calibrated] (low and high concentrations)
  • Carbon Dioxide (CO2) [Calibrated]
  • Molecular Oxygen (O2) [Calibrated]
  • Ozone (O3) [Calibrated]
  • Nitric Oxide (NO) [Calibrated] (low concentrations)
  • Nitric Dioxide (NO2) [Calibrated] (high accuracy)
  • Sulfur Dioxide (SO2) [Calibrated] (high accuracy)
  • Ammonia (NH3) [Calibrated] (low and high concentrations)
  • Methane (CH4) [Calibrated] – and other combustible gases
  • Molecular Hydrogen (H2) [Calibrated]
  • Hydrogen Sulfide (H2S) [Calibrated]
  • Hydrogen Chloride (HCl) [Calibrated]
  • Hydrogen Cyanide (HCN) [Calibrated]
  • Phosphine (PH3) [Calibrated]
  • Ethylene Oxide (ETO) [Calibrated]
  • Chlorine (Cl2) [Calibrated]
  • Temperature
  • Humidity
  • Atmospheric pressure
  • Luminosity (Luxes Accuracy) for Smart Lighting
  • Ultrasound (distance measurement)

Libelium UK/Ireland Distributor

MTG is a Libelium UK Distributor so we can offer pre-sales advice and also design, supply, implement and support IoT solutions. We can supply Meshlium, Waspmote and Plug-and-Sense products from Libelium. Our technical and dev teams can also offer advice on networking, RF comms, IT Support, software development and cloud platforms.

IoT Insights and Blog Posts

Measuring ORP/Redox with IoT

Location, location… air pollution

What can I measure with IoT?

People counting using WIFI and Bluetooth

CENSIS 6th Technology Summit

IoT Asset Tracking with LoRa/4G

Request a quote
+44 1624 777837